Aqua PurePro 3000 GPD Reverse Osmosis Water Treatment Plant
Aqua PurePro ARO series consists of devices that are completely ready for use. Aqua PurePro Designed to produce low dissolved solids water from tap or well water, these Small Commercial & Industrial RO system. use high efficiency reverse osmosis membranes. Aqua PurePro R.O. systems are designed to work at pressures of 200-400 psi for higher TDS water and use reverse osmosis membranes. The RO membranes offer higher salt removal and the higher operating pressure overcomes the loss of membrane flow due to higher TDS level.
- S.steel frame (Control box-Option)
- 20″ Prefilters x 3
- S.steel or Fiber Glass Membrane vessel
- 4″ x 40″ membrane*2
- Inlet Actuator & Flush Solenoid Valve
- Source & Ro Gauge
- Inlet & Concentration Flow meter
- S.steel Vertical Pump 1.1kW (single phase motor)
- Auto Flush Controller & TDS detector
- Pressure Regulator
- Gate Valve
- Anti-scalent device*1
- Electricity consumption: 1120W
- Shipping Dimension & weight:
- 80X50X145cm 78kgs
Features
-
- Computer Controll Panel
- Low-Pressure Monitoring Alarm
- Dual TDS Monitoring
- Feed Flush
- Tank Level Input
- Vertical Multi-Stage Stainless Steel Booster Pump
- Feed Solenoid Valve with Electronic Bypass
- Feed Low-Pressure Switch
- Pump High-Pressure Switch
- Pre-Filter 0-100 psi Panel Mounted Glycerin Filled Gauges
- Pump Discharge and Concentrate 0-600 psi Panel Mounted Glycerin Filled Gauges
- 5 Micron Sediment Filter
- O-Ring & Heavy-Duty Filter Housing
- Low Energy Membrane Elements
- Stainless Steel Membrane Housings-450 psi
- Clean-in-place (CIP) Ports
- High-Pressure Stainless Steel Tubing and Fittings
Aqua PurePro 3000 GPD Reverse Osmosis water treatment plant
Specification
-
- Production Capacity: 3000GPD
- Salt Rejection: 96-98%
- Recovery Rate: 50-60%
- Connection: 1” Feed, 3/4”Permeate, 3/4”Concentrate