0

New RO with DI Filter

Combines RO with DI resins to high quality water.

It will you 0 ppm TDS.

Advanced technologies 
This revolutionary new 6 stage system uses Reverse , Deionization and Carbon to put refreshing, clean water at your fingertips. other system available anywhere give you all kinds of purification in system that is so simple.

Using reverse osmosis with deionization can remove 99.99% of contaminants in water and people with perfect drinking . Only this combination technologies can ensure absolute and produce highest pure water.

Deionization (DI) filters 
Deionization (DI) filter the full size RO a higher level filtration. It is an filter, especially those live in areas with high levels of TOTAL DISSOLVED SOLIDS (TDS) in tap water. The post takes the small of contaminants that the could not remove filters this to greater 99.99% pure. It give you 0 ppm , Conductivity attainable less than 0.1uS/cm or resistivity of to 18 meg.ohm

Features: 

3.2 Gallons NSF Water Storage Tank.
FDA Approved Polypropylene Flat Cap Housing (double ‘).
Automatic Shut-off Valve, Flow Restrictor, Stainless Steel Check Valve.
Long Reach Chrome (upgrade faucet is acceptable)
Feed water connector.
Drain Saddle Valve.
Four Color Coded 1/4 inch Tubing for System &;
Completely Assembled
100% Factory Tested Sterilized Ready for Installation.
Installation Instruction.

CARTRIDGE FILTERS
(Stage 1) 5 Micron Filter :
With only five rating. It is effective removing dirt, rust sand particles.
(Stage 2) Carbon Filter:
It takes out 99% of the chlorine and chemicals. It provides reduction of taste, odor, color.
(Stage 3) 1 Sediment Filter :
With only 1 rating, provides effective filtration protect your membrane. provides for improved membrane performance up to 95% TDS rejection.
(Stage 4) Reverse Membrane:
A thin film (TFC) high quality membrane processes 50 gallons day. It remove the hard water contaminants may be present in water: lead, cooper, , chromium, mercury, sodium, cadmium, , nitrite, nitrate, and .
(Stage 5) Post filter:
This carbon post removes objectionable tastes and to enhance the of your drinking water. are using NSF post carbon to guarantee taste of water.
(Stage 6) Deionization () Filter:
Produce 99.99% pure by simply attaching this deionization filter with unit. Convenient post RO DI unit (RO/DI ) provides crucial supplemental filtration remove most impurities pure polished product water. Excellent in areas with water. Produce 99.99% pure . It will give 0 ppm TDS, Conductivity less than 0.1uS/cm resistivity of close to 18 meg.ohm

Membrane: 50 GPD / 189 LPD
Operation pressure: 50 -100 psi
Dimensions: (cm) 37 () x 45(H) x 20 () – system
(cm) 28 (L) 28(W) x 35 (H)- &;
Weight: 8 kg – system
4 kg – &;

Leave a Comment

Your email address will not be published. Required fields are marked *